Publikation  ASTM Volume 10.04 - Electronics; Declarable Substances in Materials; 3D Imaging Systems; Additive Manufacturing Technologies 1.4.2019 Ansicht

ASTM Volume 10.04 - Electronics; Declarable Substances in Materials; 3D Imaging Systems; Additive Manufacturing Technologies

ASTM Volume 10.04 - Electronics; Declarable Substances in Materials; 3D Imaging Systems; Additive Manufacturing Technologies

Name übersetzen

PUBLIKATION herausgegeben am 1.4.2019


ZugänglichkeitAusverkauft
PreisAUF ANFRAGE ohne MWS
AUF ANFRAGE

Produktinformation:

Bezeichnung: ASTM Volume 10.04 - Electronics; Declarable Substances in Materials; 3D Imaging Systems; Additive Manufacturing Technologies
Zahl der Seiten: 1164
Gewicht ca.: 3523 g (7.77 Pfund)
Ausgabedatum: 1.4.2019
Land: Amerikanische Publikation

Die Annotation des Normtextes:

Volume 10.04 covers standards on electronics, including:

• Innerlayer interconnections and bonding

• Materials and processes for vacuum tubes

• Electronic device characterization

• Hermetic seals

• Hybrid circuits and substrates

• Microelectronic packaging

• Leak testing

• And more This volume also includes the latest standards relating to:

• Declarable substances in materials

• 3D imaging systems

• Additive manufacturing technologies


Table of Contents



E2544-11a(2019)   Standard Terminology for Three-Dimensional (3D) Imaging Systems
E2641-09(2017)   Standard Practice for Best Practices for Safe Application of 3D Imaging Technology
E2807-11(2019)   Standard Specification for 3D Imaging Data Exchange, Version 1.0
E2919-14   Standard Test Method for Evaluating the Performance of Systems that Measure Static, Six Degrees of Freedom (6DOF), Pose
E2938-15   Standard Test Method for Evaluating the Relative-Range Measurement Performance of 3D Imaging Systems in the Medium Range
E3064-16   Standard Test Method for Evaluating the Performance of Optical Tracking Systems that Measure Six Degrees of Freedom (6DOF) Pose
E3124-17   Standard Test Method for Measuring System Latency Performance of Optical Tracking Systems that Measure Six Degrees of Freedom (6DOF) Pose
E3125-17   Standard Test Method for Evaluating the Point-to-Point Distance Measurement Performance of Spherical Coordinate 3D Imaging Systems in the Medium Range
F7-95(2016)   Standard Specification for Aluminum Oxide Powder
F15-04(2017)   Standard Specification for Iron-Nickel-Cobalt Sealing Alloy
F16-12(2017)   Standard Test Methods for Measuring Diameter or Thickness of Wire and Ribbon for Electronic Devices and Lamps
F18-12(2017)   Standard Specification and Test Method for Evaluation of Glass-to-Metal Headers Used in Electron Devices
F19-11(2016)   Standard Test Method for Tension and Vacuum Testing Metallized Ceramic Seals
F29-97(2017)   Standard Specification for Dumet Wire for Glass-to-Metal Seal Applications
F30-96(2017)   Standard Specification for Iron-Nickel Sealing Alloys
F31-16   Standard Specification for Nickel-Chromium-Iron Sealing Alloys
F44-16   Standard Specification for Metallized Surfaces on Ceramic
F72-17e1   Standard Specification for Gold Wire for Semiconductor Lead Bonding
F73-96(2017)   Standard Specification for Tungsten-Rhenium Alloy Wire for Electron Devices and Lamps
F76-08(2016)e1   Standard Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility in Single-Crystal Semiconductors
F83-71(2018)   Standard Practice for Definition and Determination of Thermionic Constants of Electron Emitters
F85-76(2018)   Standard Practice for Nomenclature for Wire Leads Used as Conductors in Electron Tubes
F96-77(2015)   Standard Specification for Electronic Grade Alloys of Copper and Nickel in Wrought Forms
F106-12(2017)   Standard Specification for Brazing Filler Metals for Electron Devices
F180-94(2015)   Standard Test Method for Density of Fine Wire and Ribbon Wire for Electronic Devices
F204-76(2018)   Standard Test Method for Surface Flaws in Tungsten Seal Rod and Wire
F205-94(2015)   Standard Test Method for Measuring Diameter of Fine Wire by Weighing
F219-96(2018)   Standard Test Methods of Testing Fine Round and Flat Wire for Electron Devices and Lamps
F256-05(2015)   Standard Specification for Chromium-Iron Sealing Alloys with 18 or 28 Percent Chromium
F269-60(2019)   Standard Test Method for Sag of Tungsten Wire
F288-96(2019)   Standard Specification for Tungsten Wire for Electron Devices and Lamps
F289-96(2019)   Standard Specification for Molybdenum Wire and Rod for Electronic Applications
F290-94(2015)   Standard Specification for Round Wire for Winding Electron Tube Grid Laterals
F364-96(2019)   Standard Specification for Molybdenum Flattened Wire for Electron Tubes?
F375-89(2015)   Standard Specification for Integrated Circuit Lead Frame Material
F390-11   Standard Test Method for Sheet Resistance of Thin Metallic Films With a Collinear Four-Probe Array
F448-18   Standard Test Method for Measuring Steady-State Primary Photocurrent
F458-13(2018)   Standard Practice for Nondestructive Pull Testing of Wire Bonds
F459-13(2018)   Standard Test Methods for Measuring Pull Strength of Microelectronic Wire Bonds
F487-13(2018)   Standard Specification for Fine Aluminum–1?% Silicon Wire for Semiconductor Lead-Bonding
F615M-95(2013)   Standard Practice for Determining Safe Current Pulse-Operating Regions for Metallization on Semiconductor Components (Metric)
F744M-16   Standard Test Method for Measuring Dose Rate Threshold for Upset of Digital Integrated Circuits (Metric)
F773M-16   Standard Practice for Measuring Dose Rate Response of Linear Integrated Circuits (Metric)
F980-16   Standard Guide for Measurement of Rapid Annealing of Neutron-Induced Displacement Damage in Silicon Semiconductor Devices
F996-11(2018)   Standard Test Method for Separating an Ionizing Radiation-Induced MOSFET Threshold Voltage Shift Into Components Due to Oxide Trapped Holes and Interface States Using the Subthreshold Current–Voltage Characteristics
F1094-87(2012)   Standard Test Methods for Microbiological Monitoring of Water Used for Processing Electron and Microelectronic Devices by Direct Pressure Tap Sampling Valve and by the Presterilized Plastic Bag Method
F1190-18   Standard Guide for Neutron Irradiation of Unbiased Electronic Components
F1192-11(2018)   Standard Guide for the Measurement of Single Event Phenomena (SEP) Induced by Heavy Ion Irradiation of Semiconductor Devices
F1238-95(2011)   Standard Specification for Refractory Silicide Sputtering Targets for Microelectronic Applications
F1262M-14   Standard Guide for Transient Radiation Upset Threshold Testing of Digital Integrated Circuits (Metric)
F1263-11(2019)   Standard Guide for Analysis of Overtest Data in Radiation Testing of Electronic Parts
F1269-13(2018)   Standard Test Methods for Destructive Shear Testing of Ball Bonds
F1367-98(2011)   Standard Specification for Chromium Sputtering Targets for Thin Film Applications
F1372-93(2012)   Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components
F1373-93(2012)   Standard Test Method for Determination of Cycle Life of Automatic Valves for Gas Distribution System Components
F1374-92(2012)   Standard Test Method for Ionic/Organic Extractables of Internal Surfaces-IC/GC/FTIR for Gas Distribution System Components
F1375-92(2012)   Standard Test Method for Energy Dispersive X-Ray Spectrometer (EDX) Analysis of Metallic Surface Condition for Gas Distribution System Components
F1376-92(2012)   Standard Guide for Metallurgical Analysis for Gas Distribution System Components
F1394-92(2012)   Standard Test Method for Determination of Particle Contribution from Gas Distribution System Valves
F1396-93(2012)   Standard Test Method for Determination of Oxygen Contribution by Gas Distribution System Components
F1397-93(2012)   Standard Test Method for Determination of Moisture Contribution by Gas Distribution System Components
F1398-93(2012)   Standard Test Method for Determination of Total Hydrocarbon Contribution by Gas Distribution System Components
F1438-93(2012)   Standard Test Method for Determination of Surface Roughness by Scanning Tunneling Microscopy for Gas Distribution System Components
F1466-99(2015)   Standard Specification for Iron-Nickel-Cobalt Alloys for Metal-to-Ceramic Sealing Applications
F1467-18   Standard Guide for Use of an X-Ray Tester (?10 keV Photons) in Ionizing Radiation Effects Testing of Semiconductor Devices and Microcircuits
F1512-94(2011)   Standard Practice for Ultrasonic C-Scan Bond Evaluation of Sputtering Target-Backing Plate Assemblies
F1513-99(2011)   Standard Specification for Pure Aluminum (Unalloyed) Source Material for Electronic Thin Film Applications
F1578-07(2014)   Standard Test Method for Contact Closure Cycling of a Membrane Switch
F1593-08(2016)   Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer
F1594-95(2011)   Standard Specification for Pure Aluminum (Unalloyed) Source Material for Vacuum Coating Applications
F1595-00(2012)   Standard Practice for Viewing Conditions for Visual Inspection of Membrane Switches
F1596-15   Standard Test Method for Exposure of a Membrane Switch or Printed Electronic Device to Temperature and Relative Humidity
F1598-95(2014)   Standard Test Method for Determining the Effects of Chemical/Solvent Exposure to a Membrane Switch/Graphic Overlay (Spot Test Method)
F1661-09(2015)   Standard Test Method for Determining the Contact Bounce Time of a Membrane Switch
F1662-16   Standard Test Method for Verifying the Specified Dielectric Withstand Voltage and Determining the Dielectric Breakdown Voltage of a Membrane Switch or Printed Electronic Device
F1663-15   Standard Test Method for Determining the Capacitance of a Membrane Switch or Printed Electronic Device
F1680-07a(2014)   Standard Test Method for Determining Circuit Resistance of a Membrane Switch
F1681-14   Standard Test Method for Determining Current Carrying Capacity of a Membrane Switch Circuit
F1684-06(2016)   Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications
F1689-05(2012)   Standard Test Method for Determining the Insulation Resistance of a Membrane Switch
F1709-97(2016)   Standard Specification for High Purity Titanium Sputtering Targets for Electronic Thin Film Applications
F1710-08(2016)   Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
F1711-96(2016)   Standard Practice for Measuring Sheet Resistance of Thin Film Conductors for Flat Panel Display Manufacturing Using a Four-Point Probe Method
F1761-00(2011)   Standard Test Method for Pass Through Flux of Circular Magnetic Sputtering Targets
F1762-14   Standard Test Method for Determining the Effects of Atmospheric Pressure Variation on a Membrane Switch
F1812-15   Standard Test Method for Determining the Effect of an ESD Discharge on a Membrane Switch or Printed Electronic Device
F1842-15   Standard Test Method for Determining Ink or Coating Adhesion on Flexible Substrates for a Membrane Switch or Printed Electronic Device
F1843-15   Standard Practice for Sample Preparation of Plastic Films used on Membrane Switch Overlays for Specular Gloss Measurements
F1844-97(2016)   Standard Practice for Measuring Sheet Resistance of Thin Film Conductors For Flat Panel Display Manufacturing Using a Noncontact Eddy Current Gage
F1845-08(2016)   Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum-Copper, Aluminum-Silicon, and Aluminum-Copper-Silicon Alloys by High-Mass-Resolution Glow Discharge Mass Spectrometer
F1892-12(2018)   Standard Guide for Ionizing Radiation (Total Dose) Effects Testing of Semiconductor Devices
F1893-18   Guide for Measurement of Ionizing Dose-Rate Survivability and Burnout of Semiconductor Devices
F1894-98(2011)   Test Method for Quantifying Tungsten Silicide Semiconductor Process Films for Composition and Thickness
F1895-14   Standard Test Method for Submersion of a Membrane Switch
F1896-16   Test Method for Determining the Electrical Resistivity of a Printed Conductive Material
F1995-13   Standard Test Method for Determining the Shear Strength of the Bond between a Surface Mount Device (SMD) and Substrate in a Membrane Switch
F1996-14   Standard Test Method for Silver Migration for Membrane Switch Circuitry
F2072-14   Standard Test Method for Hosedown of a Membrane Switch
F2073-14   Standard Test Method for Non-Destructive Short Circuit Testing of a Membrane Switch
F2112-02(2011)   Standard Terminology for Membrane Switches
F2113-01(2011)   Standard Guide for Analysis and Reporting the Impurity Content and Grade of High Purity Metallic Sputtering Targets for Electronic Thin Film Applications
F2187-02(2011)   Standard Test Method for Determining the Effect of Random Frequency Vibration on a Membrane Switch or Membrane Switch Assembly
F2188-02(2011)   Standard Test Method for Determining the Effect of Variable Frequency Vibration on a Membrane Switch or Membrane Switch Assembly
F2359-04(2011)   Standard Test Method for Determining Color of a Membrane Switch Backlit with Diffuse Light Source
F2360-08(2015)e1   Standard Test Method for Determining Luminance of a Membrane Switch Backlit with Diffuse Light Source
F2405-04(2011)   Standard Test Method for Trace Metallic Impurities in High Purity Copper by High-Mass-Resolution Glow Discharge Mass Spectrometer
F2576-15a   Standard Terminology Relating to Declarable Substances in Materials
F2577-14   Standard Guide for Assessment of Materials and Products for Declarable Substances
F2592-16   Standard Test Method for Measuring the Force-Displacement of a Membrane Switch
F2617-15   Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry
F2725-19   Standard Guide for European Unions Registration, Evaluation, and Authorization of Chemicals (REACH) Supply Chain Information Exchange
F2749-15   Standard Test Method for Determining the Effects of Creasing a Membrane Switch or Printed Electronic Device
F2750-16   Standard Test Method for Determining the Effects of Bending a Membrane Switch or Printed Electronic Device
F2771-10(2016)   Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
F2853-10(2015)   Standard Test Method for Determination of Lead in Paint Layers and Similar Coatings or in Substrates and Homogenous Materials by Energy Dispersive X-Ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams
F2865-13   Standard Guide for Classifying the Degrees of Ingress of Dust and Water into a Membrane Switch
F2866-11(2019)   Standard Test Method for Flammability of a Membrane Switch in Defined Assembly
F2924-14   Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion
F2931-19a   Standard Guide for Analytical Testing of Substances of Very High Concern in Materials and Products
F2964-12   Standard Test Method for Determining the Uniformity of the Luminance of an Electroluminescent Lamp or Other Diffuse Lighting Device
F2971-13   Standard Practice for Reporting Data for Test Specimens Prepared by Additive Manufacturing
F2980-13(2017)   Standard Test Method for Analysis of Heavy Metals in Glass by Field Portable X-Ray Fluorescence (XRF)
F3001-14   Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) with Powder Bed Fusion
F3049-14   Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes
F3055-14a   Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion
F3056-14e1   Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion
F3078-15   Standard Test Method for Identification and Quantification of Lead in Paint and Similar Coating Materials using Energy Dispersive X-ray Fluorescence Spectrometry (EDXRF)
F3091/F3091M-14   Standard Specification for Powder Bed Fusion of Plastic Materials
F3122-14   Standard Guide for Evaluating Mechanical Properties of Metal Materials Made via Additive Manufacturing Processes
F3139-15   Standard Test Method for Analysis of Tin-Based Solder Alloys for Minor and Trace Elements Using Inductively Coupled Plasma Atomic Emission Spectrometry
F3147-15   Standard Test Method for Evaluating the Reliability of Surface Mounted Device (SMD) Joints on a Flexible Circuit by a Rolling Mandrel Bend
F3152-16   Standard Test Method for Determining Abrasion Resistance of Inks and Coatings on Substrates Using Dry or Wet Abrasive Medium
F3166-16   Standard Specification for High-Purity Titanium Sputtering Target Used for Through-Silicon Vias (TSV) Metallization
F3184-16   Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion
F3187-16   Standard Guide for Directed Energy Deposition of Metals
F3192-16   Standard Specification for High-Purity Copper Sputtering Target Used for Through-Silicon Vias (TSV) Mettalization
F3213-17   Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion
F3290-17   Standard Guide for Handling and Application of a Membrane Switch or Printed Electronic Device to its Final Support Structure
F3291-17   Standard Test Method for Measuring the Force-Resistance of a Membrane Force Sensor
F3301-18a   Standard for Additive Manufacturing – Post Processing Methods – Standard Specification for Thermal Post-Processing Metal Parts Made Via Powder Bed Fusion
F3302-18   Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion
F3303-18   Standard for Additive Manufacturing – Process Characteristics and Performance: Practice for Metal Powder Bed Fusion Process to Meet Critical Applications
F3318-18   Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam
ISO/ASTM52900-15 Standard Terminology for Additive Manufacturing – General Principles – Terminology
ISO/ASTM52915-16 Standard Specification for Additive Manufacturing File Format (AMF) Version 1.2
ISO/ASTM52901-16 Standard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts
ISO/ASTM52910-18 Additive manufacturing — Design — Requirements, guidelines and recommendations
ISO/ASTM52902-19 Additive manufacturing — Test artifacts — Geometric capability assessment of additive manufacturing systems
ISO/ASTM52921-13 Standard Terminology for Additive Manufacturing-Coordinate Systems and Test Methodologies

Empfehlungen:

Aktualisierung der technischen Normen

Wollen Sie sich sicher sein, dass Sie nur die gültigen technischen Normen verwenden?
Wir bieten Ihnen eine Lösung, die Ihnen eine Monatsübersicht über die Aktualität der von Ihnen angewandten Normen sicher stellt.

Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.




Cookies Cookies

Wir benötigen Ihre Einwilligung zur Verwendung der einzelnen Daten, damit Sie unter anderem Informationen zu Ihren Interessen einsehen können. Klicken Sie auf "OK", um Ihre Zustimmung zu erteilen.

Sie können die Zustimmung verweigern hier.

Hier können Sie Ihre Cookie-Einstellungen nach Ihren Wünschen anpassen.

Wir benötigen Ihre Einwilligung zur Verwendung der einzelnen Daten, damit Sie unter anderem Informationen zu Ihren Interessen einsehen können.