|
1.1 This specification covers a group of
common requirements which, unless otherwise specified in the
individual material specification, shall apply to rolled steel
plates for pressure vessels under each of the following
specifications issued by ASTM:
| Title of Specification |
ASTM Designation |
|
| Pressure Vessel Plates, Alloy Steel, Chromium-Manganese
Silicon |
A202/A202M |
| Pressure Vessel Plates, Alloy Steel, Nickel |
A203/A203M |
| Pressure Vessel Plates, Alloy Steel, Molybdenum |
A204/A204M |
| Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium |
A225/A225M |
| Pressure Vessel Plates, Carbon Steel, Low- and
Intermediate-Tensile Strength |
A285/A285M |
| Pressure Vessel Plates, Carbon Steel, Manganese-Silicon |
A299/A299M |
| Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and
Manganese-Molybdenum-Nickel |
A302/A302M |
| Pressure Vessel Plates, Alloy Steel, 9 Percent Nickel
Double-Normalized and Tempered |
A353/A353M |
| Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum |
A387/A387M |
| Pressure Vessel Plates, Carbon Steel, High Strength
Manganese |
A455/A455M |
| Pressure Vessel Plates, Carbon Steel, for Intermediate- and
Higher-Temperature Service |
A515/A515M |
| Pressure Vessel Plates, Carbon Steel, Moderate- and
Lower-Temperature Service |
A516/A516M |
| Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched
and Tempered |
A517/A517M |
| Pressure Vessel Plates, Alloy Steel, Quenched and Tempered
Manganese-Molybdenum and Manganese-Molybdenum- Nickel |
A533/A533M |
| Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon
Steel |
A537/A537M |
| Pressure Vessel Plates, Alloy Steel, Quenched and Tempered
Chromium-Molybdenum |
A542/A542M |
| Pressure Vessel Plates, Alloy Steel, Quenched and Tempered
Nickel-Chromium-Molybdenum |
A543/A543M |
| Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8
and 9 Percent Nickel |
A553/A553M |
| Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for
Glass or Diffused Metallic Coatings |
A562/A562M |
| Pressure Vessel Plates, Carbon Steel, High Strength, for
Moderate and Lower Temperature Service |
A612/A612M |
| Pressure Vessel Plates, Five Percent Nickel Alloy Steel,
Specially Heat Treated |
A645/A645M |
| Pressure Vessel Plates, Carbon-Manganese, for Moderate and
Lower Temperature Service |
A662/A662M |
| Pressure Vessel Plates, Carbon Steel, Quenched and Tempered,
for Welded Layered Pressure Vessels |
A724/A724M |
| Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy
Steel, Quenched and Tempered |
A734/A734M |
| Pressure Vessel Plates, Low-Carbon
Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower
Temperature Service |
A735/A735M |
| Pressure Vessel Plates, Low-Carbon Age-Hardening
Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Steel |
A736/A736M |
| Pressure Vessel Plates, High-Strength Low-Alloy Steel |
A737/A737M |
| Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon
Steel, for Moderate and Lower Temperature Service |
A738/A738M |
| Pressure-Vessel Plates, Quenched and Tempered,
Manganese-Chromium-Molybdenum-Silicon-Zirconium Alloy Steel |
A782/A782M |
| Pressure Vessel Plates, Alloy Steel,
Chromium-Molybdenum-Vanadium |
A832/A832M |
| Pressure Vessel Plates, Produced by the Thermo-Mechanical
Control Process (TMCP) |
A841/A841M |
| Pressure Vessel Plates, 9 % Nickel Alloy, Produced by the
Direct-Quenching Process |
A844/A844M |
1.1.1 This specification also covers a
group of supplementary requirements which are applicable to several
of the above specifications as indicated therein. These are
provided for use when additional testing or inspection is desired
and apply only when specified individually by the purchaser in the
order.
1.2 Appendix X1 describes the production
and some of the characteristics of coiled product from which
pressure vessel plates may be produced.
1.3 Appendix X2 provides information on
the variability of tensile properties in plates for pressure
vessels.
1.4 Appendix X3 provides information on
the variability of Charpy-V-Notch impact test properties in plates
for pressure vessels.
1.5 Appendix X4 provides information on
cold bending of plates including suggested minimum inside radii for
cold bending.
1.6 These materials are intended to be
suitable for fusion welding. When the steel is to be welded, it is
presupposed that a welding procedure suitable for the grade of
steel and intended use or service will be utilized.
1.7 In case of any conflict in
requirements, the requirements of the individual material
specification shall prevail over those of this general
specification.
1.8 The purchaser may specify additional
requirements which do not negate any of the provisions of this
general specification or of the individual material specifications.
Such additional requirements, the acceptance of which are subject
to negotiation with the supplier, must be included in the order
information (see 4.1.8).
1.9 For purposes of determining
conformance with this specification and the various material
specifications referenced in 1.1, values shall be rounded to the
nearest unit in the right-hand place of figures used in expressing
the limiting values in accordance with the rounding method of
Practice E29.
1.10 The values stated in either
inch-pound units or SI units are to be regarded as standard. Within
the text, the SI units are shown in brackets. The values stated in
each system are not exact equivalents. Therefore, each system must
be used independently of the other. Combining values from the two
systems may result in nonconformance with this specification.
1.11 This specification and the
applicable material specifications are expressed in both inch-pound
units and SI units. However, unless the order specifies the
applicable "M" specification designation (SI units), the material
shall be furnished to inch-pound units.
|
|
A387/A387M-25
|
Standard Specification for Pressure
Vessel Plates, Alloy Steel, Chromium-Molybdenum
|
|
A941-26a
|
Standard Terminology Relating to Steel,
Stainless Steel, Related Alloys, and Ferroalloys (Includes all
amendments and changes 4/15/2026).
|
|
A832/A832M-25
|
Standard Specification for Pressure
Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium
|
|
A770/A770M-03(2025)
|
Standard Specification for
Through-Thickness Tension Testing of Steel Plates for Special
Applications
|
|
A751-25
|
Standard Test Methods and Practices for
Chemical Analysis of Steel Products
|
|
A738/A738M-19(2026)
|
Standard Specification for Pressure
Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for
Moderate and Lower Temperature Service
|
|
A737/A737M-17(2024)e1
|
Standard Specification for Pressure
Vessel Plates, High-Strength, Low-Alloy Steel (Includes all
amendments and changes 9/23/2024).
|
|
A736/A736M-25
|
Standard Specification for Pressure
Vessel Plates, Low-Carbon Age-Hardening
Nickel-Copper-Chromium-Molybdenum-Columbium (Niobium) Alloy
Steel
|
|
A735-A735M-12
|
Standard Specification for Pressure
Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy
Steel, for Moderate and Lower Temperature Service (Withdrawn
2017)
|
|
A285/A285M-24
|
Standard Specification for Pressure
Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile
Strength
|
|
A299/A299M-17(2022)
|
Standard Specification for Pressure
Vessel Plates, Carbon Steel, Manganese-Silicon
|
|
A302/A302M-17(2022)
|
Standard Specification for Pressure
Vessel Plates, Alloy Steel, Manganese-Molybdenum and
Manganese-Molybdenum-Nickel
|
|
A203/A203M-23
|
Standard Specification for Pressure
Vessel Plates, Alloy Steel, Nickel
|
|
A204/A204M-17(2022)
|
Standard Specification for Pressure
Vessel Plates, Alloy Steel, Molybdenum
|
|
A225/A225M-17(2022)
|
Standard Specification for Pressure
Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel
|
|
A263-12(2026)
|
Standard Specification for Stainless
Chromium Steel-Clad Plate
|
|
A264-12(2026)
|
Standard Specification for Stainless
Chromium-Nickel Steel-Clad Plate
|
|
A265-12(2026)
|
Standard Specification for Nickel and
Nickel-Base Alloy-Clad Steel Plate
|
|
A537/A537M-20
|
Standard Specification for Pressure
Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
|
|
A542/A542M-25
|
Standard Specification for Pressure
Vessel Plates, Alloy Steel, Quenched-and-Tempered,
Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium
|
|
A543/A543M-09(2021)
|
Standard Specification for Pressure
Vessel Plates, Alloy Steel, Quenched and Tempered
Nickel-Chromium-Molybdenum
|
|
A553/A553M-22
|
Standard Specification for Pressure
Vessel Plates, Alloy Steel, Quenched and Tempered 7 %, 8 %, and 9 %
Nickel
|
|
A562/A562M-10(2021)
|
Standard Specification for Pressure
Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or
Diffused Metallic Coatings
|
|
A577/A577M-17(2023)
|
Standard Specification for Ultrasonic
Angle-Beam Examination of Steel Plates
|
|
A517/A517M-17(2023)
|
Standard Specification for Pressure
Vessel Plates, Alloy Steel, High-Strength, Quenched and
Tempered
|
|
A533/A533M-24
|
Standard Specification for Pressure
Vessel Plates, Alloy Steel, Quenched and Tempered,
Manganese-Molybdenum and Manganese-Molybdenum-Nickel
|
|
A578/A578M-17(2023)
|
Standard Specification for Straight-Beam
Ultrasonic Examination of Rolled Steel Plates for Special
Applications
|
|
A612/A612M-20
|
Standard Specification for Pressure
Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower
Temperature Service
|
|
A370-26
|
Standard Test Methods and Definitions for
Mechanical Testing of Steel Products
|
|
A1017/A1017M-17(2024)
|
Standard Specification for Pressure
Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten
|
|
A435/A435M-17(2023)
|
Standard Specification for Straight-Beam
Ultrasonic Examination of Steel Plates
|
|
A455/A455M-12a(2023)
|
Standard Specification for Pressure
Vessel Plates, Carbon Steel, High-Strength Manganese (Includes all
amendments and changes 11/20/2023).
|
|
A515/A515M-17(2022)
|
Standard Specification for Pressure
Vessel Plates, Carbon Steel, for Intermediate- and
Higher-Temperature Service
|
|
A516/A516M-25
|
Standard Specification for Pressure
Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature
Service
|
|
A353/A353M-17(2022)
|
Standard Specification for Pressure
Vessel Plates, Alloy Steel, Double-Normalized and Tempered 9 %
Nickel
|
|
A645/A645M-10(2022)
|
Standard Specification for Pressure
Vessel Plates, 5 % and 51 2 % Nickel Alloy Steels, Specially Heat
Treated
|
|
A662/A662M-17(2024)
|
Standard Specification for Pressure
Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and
Lower Temperature Service
|
|
A700-14(2019)
|
Standard Guide for Packaging, Marking,
and Loading Methods for Steel Products for Shipment
|
|
A724/A724M-09(2023)
|
Standard Specification for Pressure
Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and
Tempered, for Welded Pressure Vessels
|
|
E21-20
|
Standard Test Methods for Elevated
Temperature Tension Tests of Metallic Materials
|
|
A841/A841M-17(2025)
|
Standard Specification for Steel Plates
for Pressure Vessels, Produced by Thermo-Mechanical Control Process
(TMCP)
|
|
A844/A844M-21
|
Standard Specification for Steel Plates,
9 % Nickel Alloy, for Pressure Vessels, Produced by the
Direct-Quenching Process
|
|
E29-22
|
Standard Practice for Using Significant
Digits in Test Data to Determine Conformance with
Specifications
|
|
E112-25e1
|
Standard Test Methods for Determining
Average Grain Size (Includes all amendments and changes
9/9/2026).
|
|
E208-20e1
|
Standard Test Method for Conducting
Drop-Weight Test to Determine Nil-Ductility Transition Temperature
of Ferritic Steels (Includes all amendments and changes
2/9/2023).
|
|
E709-21
|
Standard Guide for Magnetic Particle
Testing
|
|
|
BoilerandPressureVesselCode, Section
IX
|
|
Fed.Std.No.123
|
Marking for Shipment (Civil Agencies)
|
|
B1
|
Bar Code Symbology Standard
|
|
A734-A734M-12
|
Standard Specification for Pressure
Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel,
Quenched-and-Tempered (Withdrawn 2017)
|
|
Cookies
