Wir benötigen Ihre Einwilligung zur Verwendung der einzelnen Daten, damit Sie unter anderem Informationen zu Ihren Interessen einsehen können. Klicken Sie auf "OK", um Ihre Zustimmung zu erteilen.
Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
Automatische name übersetzung:
Standard-Spezifikation für warmumgeformten geschweißten und nahtlosen Kohlenstoffstahl Struktur Tubing
NORM herausgegeben am 1.10.2014
Bezeichnung normen: ASTM A501/A501M-14
Anmerkung: UNGÜLTIG
Ausgabedatum normen: 1.10.2014
SKU: NS-2850
Zahl der Seiten: 9
Gewicht ca.: 27 g (0.06 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM
Keywords:
steel tube, structural steel tubing, ICS Number Code 23.040.10 (Iron and steel pipes),23.040.40 (Metal fittings)
1. Scope | ||||||||||||
1.1 This specification covers black and hot-dipped galvanized hot-formed welded and seamless carbon steel square, round, rectangular, or special shape structural tubing for welded, riveted, or bolted construction of bridges and buildings, and for general structural purposes. 1.2 Square and rectangular tubing is furnished in sizes 1 to 32 in. [25 to 800 mm] across flat sides with wall thicknesses 0.095 to 3.00 in. [2.5 to 75 mm], dependent upon size; round tubing is furnished in NPS 1/2 [DN 15] to NPS 24 [DN 600] (see Note 1) inclusive, with nominal (average) wall thicknesses 0.109 to 1.000 in. [2.8 to 25.4 mm], dependent upon size. Special shape tubing and tubing with other dimensions is permitted to be furnished, provided that such tubing complies with all other requirements of this specification. Note 1: The dimensionless designator NPS [DN] (nominal pipe
size) has been substituted in this standard for such traditional
terms as “nominal diameter,” “size,” and “nominal size.”
1.3 This specification covers the following grades: 1.3.1 Grade A — 36 000 psi [250 MPa] min yield strength. 1.3.2 Grade B — 50 000 psi [345 MPa] min yield strength. 1.4 An optional supplementary requirement is provided for Grade B and, when desired, shall be so stated on the order. 1.5 The following precautionary statement pertains only to the test method portion of this specification: 1.6 This specification is expressed in both inch-pound units and in SI units; however, unless the purchase order specifies the applicable M specification designation (SI units), the inch-pound units shall apply. The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.7 The text of this specification contains notes and footnotes that provide explanatory material. Such notes and footnotes, excluding those in tables and figures, do not contain any mandatory requirements. |
||||||||||||
2. Referenced Documents | ||||||||||||
|
Wollen Sie sich sicher sein, dass Sie nur die gültigen technischen Normen verwenden?
Wir bieten Ihnen eine Lösung, die Ihnen eine Monatsübersicht über die Aktualität der von Ihnen angewandten Normen sicher stellt.
Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.
Letzte Aktualisierung: 2024-05-07 (Zahl der Positionen: 2 897 585)
© Copyright 2024 NORMSERVIS s.r.o.