Wir benötigen Ihre Einwilligung zur Verwendung der einzelnen Daten, damit Sie unter anderem Informationen zu Ihren Interessen einsehen können. Klicken Sie auf "OK", um Ihre Zustimmung zu erteilen.
Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties
Name übersetzen
NORM herausgegeben am 1.11.2017
Bezeichnung normen: ASTM A663/A663M-17
Anmerkung: UNGÜLTIG
Ausgabedatum normen: 1.11.2017
SKU: NS-803073
Zahl der Seiten: 4
Gewicht ca.: 12 g (0.03 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM
Keywords:
carbon steel bars, merchant quality steel bars, steel bars,, ICS Number Code 77.140.60 (Steel bars and rods)
1. Scope | ||||||||
1.1 This specification covers hot-wrought merchant quality carbon steel bars and bar size shapes produced to mechanical property requirements and intended for noncritical constructional applications (see 7.2). 1.2 Merchant quality hot-wrought steel bar is available in the following ranges of size and section: 1.2.1 Rounds, squares, and hexagons with diameters or distance across flats under 3 in. [75 mm]. 1.2.2 Bar size shapes with maximum dimensions under 3 in. [75 mm]. 1.2.3 Other bar sections with weight per foot under 40.84 lb/ft [60.78 kg/m]. 1.2.4 Flats 6 in. [152 mm] or under in width, over 0.203 in. [over 5 mm in thickness up to 150 mm in width] in thickness, and under 40.84 lb/ft or 12 in.2 [77.4 cm2] in cross-sectional area. 1.2.5 Flats over 6 in. to 8 in., inclusive in width, 0.230 in. and over [over 6 mm in thickness and over 50 mm through 200 mm in width] in thickness and under 40.84 lb/ft [60.78 kg/m] or 12 in.2 [77.4 cm2] in cross-sectional area. 1.2.6 Hot-wrought merchant quality carbon steel bars subject to mechanical property requirements are hot wrought in straight lengths only. 1.3 Some applications may require one or more of the available designations shown under supplementary requirements. Note 1: Special quality hot-wrought carbon steel bars subject
to mechanical property requirements are covered in Specification
A675/A675M.
1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||
2. Referenced Documents | ||||||||
|
Wollen Sie sich sicher sein, dass Sie nur die gültigen technischen Normen verwenden?
Wir bieten Ihnen eine Lösung, die Ihnen eine Monatsübersicht über die Aktualität der von Ihnen angewandten Normen sicher stellt.
Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.
Letzte Aktualisierung: 2024-05-03 (Zahl der Positionen: 2 896 946)
© Copyright 2024 NORMSERVIS s.r.o.