ASTM A711/A711M-07(2..
ASTM A727/A727M-13..
ASTM A745/A745M-12..
ASTM A768/A768M-05(2..
ASTM A788/A788M-14..
ASTM A836/A836M-13..
Cookies
Wir benötigen Ihre Einwilligung zur Verwendung der einzelnen Daten, damit Sie unter anderem Informationen zu Ihren Interessen einsehen können. Klicken Sie auf "OK", um Ihre Zustimmung zu erteilen.
ASTM A915/A915M-08(2013)
Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades
Automatische name übersetzung:
Standard-Spezifikation für Stahlguss, Carbon und Legierung, chemische Anforderungen Ähnlich wie bei Standard-Schmiede Grades
NORM herausgegeben am 1.4.2013
Informationen über die Norm:
Bezeichnung normen: ASTM A915/A915M-08(2013)
Anmerkung: UNGÜLTIG
Ausgabedatum normen: 1.4.2013
SKU: NS-4792
Zahl der Seiten: 3
Gewicht ca.: 9 g (0.02 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM
Kategorie - ähnliche Normen:
Die Annotation des Normtextes ASTM A915/A915M-08(2013) :
Keywords:
alloy steel, carbon steel, steel castings, ICS Number Code 77.140.85 (Iron and steel forgings)
Ergänzende Informationen
| 1. Scope | ||||||||
|
1.1 This specification covers carbon and low alloy steel castings having chemical analyses similar to that of the standard wrought grades. 1.2 Several grades are covered and are designated by chemical composition shown in Table 1. Grade |
C |
Mn |
P, max |
S, max |
Si |
Ni |
Cr |
Mo |
|
|
||||||||
|
SC 1020 |
0.18/0.23 |
0.40/0.80 |
0.040 |
0.040 |
0.30/0.60 |
. . . |
. . . |
. . . |
|
SC 1025 |
0.22/0.28 |
0.40/0.80 |
0.040 |
0.040 |
0.30/0.60 |
. . . |
. . . |
. . . |
|
SC 1030 |
0.28/0.34 |
0.50/0.90 |
0.040 |
0.040 |
0.30/0.60 |
. . . |
. . . |
. . . |
|
SC 1040 |
0.37/0.44 |
0.50/0.90 |
0.040 |
0.040 |
0.30/0.60 |
. . . |
. . . |
. . . |
|
SC 1045 |
0.43/0.50 |
0.50/0.90 |
0.040 |
0.040 |
0.30/0.60 |
. . . |
. . . |
. . . |
|
SC 4130 |
0.28/0.33 |
0.40/0.80 |
0.035 |
0.040 |
0.30/0.60 |
. . . |
0.80/1.10 |
0.15/0.25 |
|
SC 4140 |
0.38/0.43 |
0.70/1.10 |
0.035 |
0.040 |
0.30/0.60 |
. . . |
0.80/1.10 |
0.15/0.25 |
|
SC 4330 |
0.28/0.33 |
0.60/0.90 |
0.035 |
0.040 |
0.30/0.60 |
1.65/2.00 |
0.70/0.90 |
0.20/0.30 |
|
SC 4340 |
0.38/0.43 |
0.60/0.90 |
0.035 |
0.040 |
0.30/0.60 |
1.65/2.00 |
0.70/0.90 |
0.20/0.30 |
|
SC 8620 |
0.18/0.23 |
0.60/1.00 |
0.035 |
0.040 |
0.30/0.60 |
0.40/0.70 |
0.40/0.60 |
0.15/0.25 |
|
SC 8625 |
0.23/0.28 |
0.60/1.00 |
0.035 |
0.040 |
0.30/0.60 |
0.40/0.70 |
0.40/0.60 |
0.15/0.25 |
|
SC 8630 |
0.28/0.33 |
0.60/1.00 |
0.035 |
0.040 |
0.30/0.60 |
0.40/0.70 |
0.40/0.60 |
0.15/0.25 |
1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.3.1 Within the text, the SI units are shown in brackets.
1.3.2 Inch-pound units are applicable for material ordered to Specification A915 and SI units for material ordered to Specification A915M.
|
Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use |
|
|
Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
