Wir benötigen Ihre Einwilligung zur Verwendung der einzelnen Daten, damit Sie unter anderem Informationen zu Ihren Interessen einsehen können. Klicken Sie auf "OK", um Ihre Zustimmung zu erteilen.
Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip
Automatische name übersetzung:
Standard-Spezifikation für Nickel-Molybdän-Legierung Platten, Bleche und Streifen
NORM herausgegeben am 1.2.2013
Bezeichnung normen: ASTM B333-03(2013)
Anmerkung: UNGÜLTIG
Ausgabedatum normen: 1.2.2013
SKU: NS-6273
Zahl der Seiten: 3
Gewicht ca.: 9 g (0.02 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM
Keywords:
plate, sheet, strip, UNS N10001, UNS N10629, UNS N10665, UNS N10675, UNS N10624, ICS Number Code 77.150.40 (Nickel and chromium products)
1. Scope | |||||
1.1 This specification2 covers plate, sheet, and strip of nickel-molybdenum alloys (UNS N10001, N10665, N10675, N10629, and N10624)* as shown in Table 1, for use in general corrosive service. Element |
Composition Limits, % |
|
|||
Alloy |
Alloy |
Alloy |
Alloy |
Alloy |
|
Nickel |
remainderA |
remainderA |
65.0 min |
remainderA |
Bal |
Molybdenum |
26.0–30.0 |
26.0–30.0 |
27.0–32.0 |
26.0–30.0 |
21.0-25.0 |
Iron |
4.0–6.0 |
2.0 max |
1.0–3.0 |
1.0–6.0 |
5.0-8.0 |
Chromium |
1.0 max |
1.0 max |
1.0–3.0 |
0.5–1.5 |
6.0-10.0 |
Carbon, max |
0.05 |
0.02 |
0.01 |
0.01 |
0.01 |
Silicon, max |
1.0 |
0.10 |
0.10 |
0.05 |
0.10 |
Cobalt, max |
2.5 |
1.00 |
3.0 |
2.5 |
1.0 |
Manganese, |
1.0 |
1.0 |
3.0 |
1.5 |
1.0 |
Phosphorus, |
0.04 |
0.04 |
0.030 |
0.04 |
0.025 |
Sulfur, max |
0.03 |
0.03 |
0.010 |
0.01 |
0.01 |
Vanadium |
0.2–0.4 |
... |
0.20 max |
... |
... |
Nickel plus |
... |
... |
94.0–98.0 |
|
... |
Aluminum |
... |
... |
0.50 max |
0.1–0.5 |
0.5 |
Columbium |
... |
... |
0.20 |
|
... |
Copper, max |
... |
... |
0.20 |
0.5 |
0.5 |
Tantalum, |
... |
... |
0.20 |
|
... |
Titanium, |
... |
... |
0.20 |
|
... |
Tungsten, |
... |
... |
3.0 |
|
... |
Zirconium, |
... |
... |
0.10 |
|
... |
Magnesium, |
... |
... |
... |
... |
... |
Alloy
Thickness,
in. (mm)
Tensile Strength,
min, psi (MPa)
Yield Strength
(0.2 % Offset),
min, psi (MPa)
Elongation
in 2 in.
(50.8 mm)
or 4DA
min, %
Rockwell
Hardness,B
max
Sheet and Strip
N10001
Under 3/16 (4.76)
115 000 (795)
50 000 (345)
45
100 HRB
N10665
Under 3/16 (4.76)
110 000 (760)
51 000 (350)
40
100 HRB
N10675
Under 3/16 (4.76)
110 000 (760)
51 000 (350)
40
100 HRB
N10629
Under 3/16 (4.76)
110 000 (760)
51 000 (350)
40
100 HRB
N10624
Under 3/16 (4.76)
104 000 (720)
46 000 (320)
40
100 HRB
Plate
N10001
3/16 to 21/2 in. (4.76 to 63.5 mm), incl
100 000 (690)
45 000 (310)
40
100 HRB
N10665
3/16 to 21/2 in. (4.76 to 63.5 mm), incl
110 000 (760)
51 000 (350)
40
100 HRB
N10675
3/16 to 21/2 in. (4.76 to 63.5 mm), incl
110 000 (760)
51 000 (350)
40
100 HRB
N10629
3/16 to 21/2 in. (4.76 to 63.5 mm), incl
110 000 (760)
51 000 (350)
40
100 HRB
N10624
3/16 to 21/2 in. (4.76 to 63.5 mm), incl
104 000 (720)
46 000 (320)
40
100 HRB
1.2.1 Sheet and Strip—Hot or cold rolled, solution annealed, and descaled unless solution anneal is performed in an atmosphere yielding a bright finish.
1.2.2 Plate—Hot or cold rolled, solution annealed, and descaled.
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.
Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip |
|
Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness (Includes all amendments and changes 5/7/2019). |
|
Standard Test Methods for Determining Average Grain Size |
Historisch
1.6.2011
Historisch
1.5.2012
Historisch
1.1.2010
Historisch
1.8.2012
Historisch
1.10.2013
Historisch
1.2.2014
Wollen Sie sich sicher sein, dass Sie nur die gültigen technischen Normen verwenden?
Wir bieten Ihnen eine Lösung, die Ihnen eine Monatsübersicht über die Aktualität der von Ihnen angewandten Normen sicher stellt.
Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.
Letzte Aktualisierung: 2024-04-25 (Zahl der Positionen: 2 896 007)
© Copyright 2024 NORMSERVIS s.r.o.