Wir benötigen Ihre Einwilligung zur Verwendung der einzelnen Daten, damit Sie unter anderem Informationen zu Ihren Interessen einsehen können. Klicken Sie auf "OK", um Ihre Zustimmung zu erteilen.
Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip
Automatische name übersetzung:
Standard-Spezifikation für Nickel-Chrom-Eisen-Molybdän-Kupfer-Legierung Platten, Bleche und Streifen
NORM herausgegeben am 1.2.2013
Bezeichnung normen: ASTM B582-07(2013)
Anmerkung: UNGÜLTIG
Ausgabedatum normen: 1.2.2013
SKU: NS-7270
Zahl der Seiten: 3
Gewicht ca.: 9 g (0.02 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM
Keywords:
plate, sheet, strip, N06007, N60975, N06985, N06030, ICS Number Code 77.150.40 (Nickel and chromium products)
1. Scope | |||||
1.1 The specification2 covers plate, sheet, and strip of nickel-chromium-iron-molybdenum-copper alloys (UNS N06007, N06975, N06985, and N06030)* as shown in Table 1, for use in general corrosive service. Element |
Composition Limits, % |
||||
|
Alloy N06007 |
Alloy N06975 |
Alloy N06985 |
Alloy N06030 |
|
Nickel |
|
remainderA |
47.0 to 52.0 |
remainderA |
remainderA |
Chromium |
|
21.0 to 23.5 |
23.0 to 26.0 |
21.0 to 23.5 |
28.0 to 31.5 |
Iron |
|
18.0 to 21.0 |
remainderA |
18.0 to 21.0 |
13.0 to 17.0 |
Molybdenum |
|
5.5 to 7.5 |
5.0 to 7.0 |
6.0 to 8.0 |
4.0 to 6.0 |
Copper |
|
1.5 to 2.5 |
0.70 to 1.20 |
1.5 to 2.5 |
1.0 to 2.4 |
Manganese |
|
1.0 to 2.0 |
1.0 max |
1.0 max |
1.5 max |
Cobalt, max |
|
2.5 |
... |
5.0 |
5.0 |
Carbon, max |
|
0.05 |
0.03 |
0.015 |
0.03 |
Tungsten |
|
1.0 max |
... |
1.5 max |
1.5 to 4.0 |
Silicon, max |
|
1.0 |
1.0 |
1.0 |
0.8 |
Phosphorus, max |
|
0.04 |
0.03 |
0.04 |
0.04 |
Sulfur, max |
|
0.03 |
0.03 |
0.03 |
0.02 |
Columbium + tantalum |
|
1.75 to 2.50 |
... |
0.50 max |
0.30 to 1.50 |
Titanium |
|
... |
0.70–1.50 |
... |
... |
1.2.1 Sheet and Strip—Hot or cold rolled, solution annealed, and descaled unless solution anneal is performed in an atmosphere yielding a bright finish.
1.2.2 Plate—Hot or cold rolled, solution annealed, and descaled.
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.
Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip |
Historisch
1.10.2009
Historisch
1.5.2011
Historisch
1.3.2008
Historisch
1.10.2013
Historisch
1.10.2009
Historisch
1.10.2013
Wollen Sie sich sicher sein, dass Sie nur die gültigen technischen Normen verwenden?
Wir bieten Ihnen eine Lösung, die Ihnen eine Monatsübersicht über die Aktualität der von Ihnen angewandten Normen sicher stellt.
Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.
Letzte Aktualisierung: 2024-04-25 (Zahl der Positionen: 2 896 007)
© Copyright 2024 NORMSERVIS s.r.o.