Cookies
Wir benötigen Ihre Einwilligung zur Verwendung der einzelnen Daten, damit Sie unter anderem Informationen zu Ihren Interessen einsehen können. Klicken Sie auf "OK", um Ihre Zustimmung zu erteilen.
ASTM B792-13
Standard Specification for Zinc Alloys in Ingot Form for Slush Casting
Automatische name übersetzung:
Standard-Spezifikation für Zinklegierungen in Barrenform für Slush Casting
NORM herausgegeben am 1.2.2013
Informationen über die Norm:
Bezeichnung normen: ASTM B792-13
Anmerkung: UNGÜLTIG
Ausgabedatum normen: 1.2.2013
SKU: NS-8140
Zahl der Seiten: 3
Gewicht ca.: 9 g (0.02 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM
Die Annotation des Normtextes ASTM B792-13 :
Keywords:
casting, casting alloys, gravity casting, permanent mold casting, slush casting, zinc, zinc alloys, ICS Number Code 77.150.60 (Lead, zinc and tin products)
Ergänzende Informationen
| 1. Scope | ||
|
1.1 This specification covers commercial zinc alloys in ingot form for remelting for the manufacture of castings from the alloys as specified and designated as shown in
|
Composition, % |
|
|
UNS Z34510 |
UNS Z30500 |
|
|
Color CodeC |
Black/Red |
Black/Orange |
|
Element |
|
|
|
Copper |
0.2–0.3 |
0.1 max |
|
Aluminum |
4.50–5.00 |
5.25–5.75 |
|
Lead |
0.007 max |
0.007 max |
|
Cadmium |
0.005 max |
0.005 max |
|
Tin |
0.005 max |
0.005 max |
|
Iron |
0.100 max |
0.100 max |
|
Magnesium |
0.010 max |
0.010 max |
|
Zinc |
Remainder |
Remainder |
1.2 Slush casting alloys are used
primarily for the manufacture of hollow castings such as lighting
fixtures, lamp bases, and small statues.
1.3 This specification covers two zinc alloys which are specified and designated as follows:
|
UNS |
ASTM |
|
Z34510 |
Slush Casting Alloy A |
|
Z30500 |
Slush Casting Alloy B |
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.
|
Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
|
|
ISO 3815-2 |
|
|
ISO 3815-1 |
Zinc and zinc alloys Part 1: Analysis of solid samples by optical emission spectrometry |
|
Standard Specification for General Requirements for Zinc and Zinc Alloy Products |
|
|
Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys |
|
|
Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS) |
|
|
Standard Practice for Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition |
|
|
Standard Terminology Relating to Non-ferrous Metals and Alloys |
|
|
Standard Practice for the Use of Color Codes for Zinc Casting Alloy Ingot |
Empfehlungen:
Aktualisierung der technischen Normen
Wollen Sie sich sicher sein, dass Sie nur die gültigen technischen Normen verwenden?
Wir bieten Ihnen eine Lösung, die Ihnen eine Monatsübersicht über die Aktualität der von Ihnen angewandten Normen sicher stellt.
Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.
