Wir benötigen Ihre Einwilligung zur Verwendung der einzelnen Daten, damit Sie unter anderem Informationen zu Ihren Interessen einsehen können. Klicken Sie auf "OK", um Ihre Zustimmung zu erteilen.
Standard Test Method for Measurement of Hydraulic Characteristics of Stormwater Filtration Elements
Automatische name übersetzung:
Standard-Testverfahren zur Messung von hydraulischen Eigenschaften von Regenwasserfiltrationselemente
NORM herausgegeben am 1.4.2016
Bezeichnung normen: ASTM C1814/C1814M-16
Anmerkung: UNGÜLTIG
Ausgabedatum normen: 1.4.2016
SKU: NS-635657
Zahl der Seiten: 4
Gewicht ca.: 12 g (0.03 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM
Keywords:
filter, flow rate, hydraulic capacity, pressure, specific flow rate, surface loading rate,, ICS Number Code 13.060.30 (Sewage water)
Significance and Use | ||||||||||||||||
5.1 Each element has unique flow patterns and each element has unique hydraulic characteristics (that is, flow and head loss). In addition, each element may exhibit variable hydraulic capacity as the element filters become occluded, the filter media swells or shrinks, and water viscosity (that is, water temperature) changes. In some cases filters experience hysteresis with respect to filling and emptying. The testing procedure in Section 7 will help develop the parameters necessary to determine the hydraulic capacity of an element at one instance in time. The test can be repeated at desired time increments to determine how the hydraulic capacity varies over time. |
||||||||||||||||
1. Scope | ||||||||||||||||
1.1 This test standard shall be used to determine the hydraulic characteristics of stormwater filtration elements. 1.2 Elements tested shall be of a size commonly manufactured, not a scale model. 1.3 The position and orientation of all filter elements during testing shall be identical to the position and orientation used during normal operation. 1.4 The direction of flow during testing shall be identical to the direction of flow during normal operation. 1.5 As each stormwater treatment device is unique in design and hydraulic capacity, a sufficient number of accurately measured data points are needed to properly define the hydraulic characteristics of each test element. Therefore, it is imperative that the element setup and subsequent testing methodologies be well defined and executed to assure accurate flow and elevation data. 1.6 This test determines the hydraulic capacity of stormwater filtration systems. Test results are not an indicator of the filtration performance with respect to the capture of solids or other materials. 1.7 Units—The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||||||
2. Referenced Documents | ||||||||||||||||
|
Bereitstellung von aktuellen Informationen über legislative Vorschriften in der Sammlung der Gesetze bis zum Jahr 1945.
Aktualisierung 2x pro Monat!
Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.
Letzte Aktualisierung: 2024-05-17 (Zahl der Positionen: 2 902 148)
© Copyright 2024 NORMSERVIS s.r.o.