Wir benötigen Ihre Einwilligung zur Verwendung der einzelnen Daten, damit Sie unter anderem Informationen zu Ihren Interessen einsehen können. Klicken Sie auf "OK", um Ihre Zustimmung zu erteilen.
Standard Test Methods for Chemical Oxygen Demand (Dichromate Oxygen Demand) of Water (Includes all amendments And changes 1/15/2020).
Automatische name übersetzung:
Standard-Prüfverfahren für Chemischer Sauerstoffbedarf (Dichromat Sauerstoffbedarf) des Wassers
NORM herausgegeben am 15.6.2012
Bezeichnung normen: ASTM D1252-06(2012)e1
Anmerkung: UNGÜLTIG
Ausgabedatum normen: 15.6.2012
SKU: NS-16785
Zahl der Seiten: 12
Gewicht ca.: 36 g (0.08 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM
Keywords:
chemical oxygen demand, COD, demand, oxygen demand, ICS Number Code 13.060.50 (Examination of water for chemical substances)
Significance and Use | ||||||||||||||||
These test methods are used to chemically determine the maximum quantity of oxygen that could be consumed by biological or natural chemical processes due to impurities in water. Typically this measurement is used to monitor and control oxygen-consuming pollutants, both inorganic and organic, in domestic and industrial wastewaters. The relationship of COD to other water quality parameters such as TOC and TOD is described in the literature. |
||||||||||||||||
1. Scope | ||||||||||||||||
1.1 These test methods cover the
determination of the quantity of oxygen that certain impurities in
water will consume, based on the reduction of a dichromate solution
under specified conditions. The following test methods are
included: 1.2 These test methods are limited by the reagents employed to a maximum chemical oxygen demand (COD) of 800 mg/L. Samples with higher COD concentrations may be processed by appropriate dilution of the sample. Modified procedures in each test method (Section 15 for Test Method A and Section 24 for Test Method B) may be used for waters of low COD content (< 50 mg/L). 1.3 As a general rule, COD results are not accurate if the sample contains more than 1000 mg/L Cl−. Consequently, these test methods should not be applied to samples such as seawaters and brines unless the samples are pretreated as described in Appendix X1. 1.4 This test method was used successfully on a standard made up in reagent water. It is the user's responsibility to ensure the validity of these test methods for waters of untested matrices. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Sections 8, 15.6, and 24.5. |
||||||||||||||||
2. Referenced Documents | ||||||||||||||||
|
Historisch
1.12.2009
Historisch
1.12.2009
Historisch
1.6.2010
Historisch
1.1.2014
Historisch
1.2.2011
Historisch
1.4.2014
Wollen Sie sich sicher sein, dass Sie nur die gültigen technischen Normen verwenden?
Wir bieten Ihnen eine Lösung, die Ihnen eine Monatsübersicht über die Aktualität der von Ihnen angewandten Normen sicher stellt.
Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.
Letzte Aktualisierung: 2024-05-05 (Zahl der Positionen: 2 897 047)
© Copyright 2024 NORMSERVIS s.r.o.