Vorsicht!

In Ihrem Browser ist die Javascript-Aktivierung nicht erlaubt. Einige Funktionen mögen nicht richtig funktionieren. Für vollständige Funktionalität des Internet-Geschäfts empfehlen wir Javascript zu aktivieren. Siehe hier Instruktion, wie man im Ihren Web-Browser JavaScript aktiviert.

Angezeigte Währung: €

Preisanzeige: ohne MWS

Ergänzende Informationen

ASTM D5450/D5450M-93(2006)

Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders

Automatische name übersetzung:

Standard Test Method for Transverse Zugeigenschaften von Hoop Wund Polymer Matrix Composite- Zylinder

NORM herausgegeben am 15.1.2006

Sprache
Realisierung	Sicheres Online-PDF - 74.20 € Gedruckt - 74.20 €
Zugänglichkeit	AUF LAGER
Preis	74.20 € ohne MWS
74.20 €

Informationen über die Norm:

Bezeichnung normen: ASTM D5450/D5450M-93(2006)
Anmerkung: UNGÜLTIG
Ausgabedatum normen: 15.1.2006
SKU: NS-31246
Zahl der Seiten: 8
Gewicht ca.: 24 g (0.05 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM

Drucken

Einem Bekannten abschicken

Anfrage

Die Annotation des Normtextes ASTM D5450/D5450M-93(2006) :

Keywords:

composite materials, filament winding, Poisson´s ratio, transverse modulus of elasticity, transverse tensile properties, tranverse tensile strength, tubes, ICS Number Code 83.140.20 (Laminated sheets)

Ergänzende Informationen

Significance and Use

This test method is used to produce transverse tensile property data for material specifications, research and development, quality assurance, and structural design and analysis. Factors which influence the transverse tensile response and should, therefore, be reported are: material, methods of material preparation, specimen preparation, specimen conditioning, environment of testing, specimen alignment and gripping, speed of testing, void content, and fiber volume fraction. Properties, in the test direction, which may be obtained from this test method include:

5.1.1 Transverse Tensile Strength,

5.1.2 Transverse Tensile Strain at Failure,

5.1.3 Transverse Tensile Modulus of Elasticity, E₂₂, and

5.1.4 Poisson’Ratio, υ₂₁.

1. Scope

1.1 This test method determines the transverse tensile properties of wound polymer matrix composites reinforced by high-modulus continuous fibers. It describes testing of hoop wound (90°) cylinders in axial tension for determination of transverse tensile properties.

1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the inch-pound units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

E1237-20	Standard Guide for Installing Bonded Resistance Strain Gages
D792-20	Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
E691-23	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
D5449/D5449M-22	Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders
E4-24	Standard Practices for Force Calibration and Verification of Testing Machines
E6-25	Standard Terminology Relating to Methods of Mechanical Testing
E111-17(2025)e1	Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus (Includes all amendments and changes 12/11/2025).
E122-17(2022)	Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process
E132-17(2025)e1	Standard Test Method for Poisson’s Ratio at Room Temperature (Includes all amendments and changes 12/11/2025).
E177-26a	Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods (Includes all amendments and changes 5/14/2026).
D5448/D5448M-22	Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders
E251-20a	Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages (Includes all amendments and changes 8/7/2020).
D883-26b	Standard Terminology Relating to Plastics (Includes all amendments and changes 8/24/2026).
D2584-25	Standard Test Method for Ignition Loss of Cured Reinforced Resins
D2734-23	Standard Test Methods for Void Content of Reinforced Plastics
E456-13a(2022)e1	Standard Terminology Relating to Quality and Statistics (Includes all amendments and changes 4/16/2024).
D3171-22	Standard Test Methods for Constituent Content of Composite Materials
D5229/D5229M-20	Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials
D3878-26	Standard Terminology for Composite Materials

Empfehlungen:

Aktualisierung der technischen Normen

Wollen Sie sich sicher sein, dass Sie nur die gültigen technischen Normen verwenden?
Wir bieten Ihnen eine Lösung, die Ihnen eine Monatsübersicht über die Aktualität der von Ihnen angewandten Normen sicher stellt.

Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.

Hier können Sie Ihre Cookie-Einstellungen nach Ihren Wünschen anpassen.

Wir benötigen Ihre Einwilligung zur Verwendung der einzelnen Daten, damit Sie unter anderem Informationen zu Ihren Interessen einsehen können.