Wir benötigen Ihre Einwilligung zur Verwendung der einzelnen Daten, damit Sie unter anderem Informationen zu Ihren Interessen einsehen können. Klicken Sie auf "OK", um Ihre Zustimmung zu erteilen.
Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
Automatische name übersetzung:
Standard-Prüfverfahren für Abmessungen von Feststoffproben
NORM herausgegeben am 15.12.2011
Bezeichnung normen: ASTM D5947-11
Anmerkung: UNGÜLTIG
Ausgabedatum normen: 15.12.2011
SKU: NS-33150
Zahl der Seiten: 10
Gewicht ca.: 30 g (0.07 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM
Keywords:
caliper, dimensions, elastomers, micrometer, plastics, Caliper, Dimensions--plastic materials/applications, Elastomeric materials/applications, Micrometer measurement, Physical properties/dimensions/characteristics, Solid plastics, ICS Number Code 83.080.01 (Plastics in general)
Significance and Use | ||||||||||||
These test methods shall be used where precise dimensions are necessary for the calculation of properties expressed in physical units. They are not intended to replace practical thickness measurements based on commercial portable tools, nor is it implied that thickness measurements made by the procedures will agree exactly. |
||||||||||||
1. Scope | ||||||||||||
1.1 These test methods cover determination of the physical dimensions of solid plastic specimens where the dimensions are used directly in determining the results of tests for various properties. Use these test methods except as otherwise required in material specifications. 1.2 The values stated in SI units are to be regarded as standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 1—This standard and ISO 16012 address the same subject matter, but differ in technical content. |
||||||||||||
2. Referenced Documents | ||||||||||||
|
Historisch
1.4.2012
Historisch
1.4.2010
Historisch
1.4.2013
Historisch
1.4.2011
Historisch
1.11.2013
Historisch
1.4.2010
Wollen Sie sich sicher sein, dass Sie nur die gültigen technischen Normen verwenden?
Wir bieten Ihnen eine Lösung, die Ihnen eine Monatsübersicht über die Aktualität der von Ihnen angewandten Normen sicher stellt.
Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.
Letzte Aktualisierung: 2024-05-06 (Zahl der Positionen: 2 897 584)
© Copyright 2024 NORMSERVIS s.r.o.