Vorsicht!

In Ihrem Browser ist die Javascript-Aktivierung nicht erlaubt. Einige Funktionen mögen nicht richtig funktionieren. Für vollständige Funktionalität des Internet-Geschäfts empfehlen wir Javascript zu aktivieren. Siehe hier Instruktion, wie man im Ihren Web-Browser JavaScript aktiviert.

Angezeigte Währung: €

Preisanzeige: ohne MWS

Ergänzende Informationen

ASTM D6201-99

Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation

Automatische name übersetzung:

Standard Test Method for Dynamometer Auswertung von unverbleitem Ottomotor Brennstoff für Ablagerungen am Einlassventil Formation

NORM herausgegeben am 10.11.2001

Sprache
Realisierung	Sicheres Online-PDF - 108.10 € Gedruckt - 108.10 €
Zugänglichkeit	AUF LAGER
Preis	108.10 € ohne MWS
108.10 €

Informationen über die Norm:

Bezeichnung normen: ASTM D6201-99
Anmerkung: UNGÜLTIG
Ausgabedatum normen: 10.11.2001
SKU: NS-34206
Zahl der Seiten: 28
Gewicht ca.: 84 g (0.19 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM

Drucken

Einem Bekannten abschicken

Anfrage

Die Annotation des Normtextes ASTM D6201-99 :

Keywords:

automotive spark-ignition engine fuel, deposit control additive, deposits (in internal combustion engines), intake valve deposits, ICS Number Code 75.160.20 (Liquid fuels)

Ergänzende Informationen

1. Scope

1.1 This test method coves an engine dynamometer test procedure for evaluation of intake valve deposit formation of unleaded spark-ignition engine fuels. This test uses a Ford Ranger 2.3 L four-cylinder engine. The following details the procedure, hardware, and operations used for this test.

1.2 The ASTM Test Monitoring Center (TMC) is responsible for engine test stand certification as well as issuance of information letters after test method modifications are approved by Subcommittee D02.A and Committee D02. Users of this test method shall request copies of recent information letters from the TMC to ensure proper conduct of the test method.

1.3 The values stated in SI units are to be regarded as the standard. Approximate inch-pound units are shown in parenthesis for information.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine applicability of regulatory limitations prior to use. Specific precautionary statements are given throughout this test method.

1.4 This test method is arranged as follows:

Subject	Section
Scope	1
Referenced Documents	2
Terminology	3
Summary of Test Method	4
Significance and Use	5
Apparatus	6
Laboratory Facilities	6.1
Test Stand Laboratory Equipment	6.2
Test Engine Hardware	6.3
Special Measurement and Assembly Equipment	6.4
Reagents and Materials	7
Fuel	7.1
Engine Oil and Assembly Lubricant	7.2
Engine Coolant	7.3
Solvents and Cleaners	7.4
Fuel Injector Test Fluid	7.5
Valve Lapping Compound	7.6
Crushed Walnut Shells	7.7
Desiccant	7.8
Hazards	8
Specific Hazards	8.1
Reference Fuel	9
Reference Base Fuel Batch Approval Process	9.1
Fuel Batch Analyses	9.2
Fuel Batch Shipment and Storage	9.3
Preparation of Apparatus	10
Test Stand Preparation	10.1
Engine Block Preparation	10.2
Preparation of Miscellaneous Engine Components	10.3
Cylinder Head Preparation	10.4
Cylinder Head Assembly	10.5
Cylinder Head Installation	10.6
Final Engine Assembly	10.7
Calibration	11
Test Stand Calibration	11.1
Instrumentation Calibration	11.2
Test Procedure	12
Pretest Procedure	12.1
Engine Operating Procedure	12.2
Periodic Measurements and Functions	12.3
End of Test Procedures	12.4
Determination of Test Results	13
Post-test Intake Valve Weighing Procedure	13.1
Photographs of Parts - General	13.2
Induction System Rating	13.3
Determination of Test Validity - Engine Conformance	13.4
Final Test Report	14
Standard Report	14.1
Data Acquisition Summary Report	14.2
Photographs of Specific Parts	14.3
Precision and Bias	15
Precision	15.1
Bias	15.2
Keywords	16

Annexes
Detailed Specifications and Photographs of Apparatus	Annex A1
Engine Part Number Listing	Annex A2

2. Referenced Documents

D86-23ae2	Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Includes all amendments and changes 11/4/2024).
D235-22	Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent)
D287-22	Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer/Method)
D381-25	Standard Test Method for Gum Content in Fuels by Jet Evaporation
D525-12a(2025)	Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method) (Includes all amendments and changes 12/24/2025).
D873-22	Standard Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method)
D1266-18	Standard Test Method for Sulfur in Petroleum Products (Lamp Method) (Withdrawn 2025)
D1298-24	Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
D1319-26	Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
J254	Instrumentation and Techniques for Exhaust Gas Emissions Measurement
D5302-01a	Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation and Wear in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions (Withdrawn 2003)
D2427-06	Standard Test Method for Determination of C2 through C5 Hydrocarbons in Gasolines by Gas Chromatography
D2622-26	Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
E1064-24	Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
D5482-26	Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method—Atmospheric)
E203-24	Standard Test Method for Water Using Volumetric Karl Fischer Titration
MC96.1	Temperature Measurement-Thermocouples
CRC Manual 16,	Carburetor and Induction System Rating Manual
D1744-13	Standard Test Method for Determination of Water in Liquid Petroleum Products by Karl Fischer Reagent (Withdrawn 2016)
D3237-22	Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
D4057-22	Standard Practice for Manual Sampling of Petroleum and Petroleum Products
D4294-24	Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
D4814-26	Standard Specification for Automotive Spark-Ignition Engine Fuel
D4953-26	Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)
D5059-26	Standard Test Methods for Lead and Manganese in Gasoline by X-Ray Fluorescence Spectroscopy
D5190-07	Standard Test Method for Vapor Pressure of Petroleum Products (Automatic Method) (Withdrawn 2012)
D5191-22	Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method)

Empfehlungen:

Aktualisierung der Gesetze

Wollen Sie sich sicher sein, dass Sie nur die gültigen technischen Vorschriften verwenden?
Wir bieten Ihnen Lösungen, damit Sie immer nur die gültigen (aktuellen) legislativen Vorschriften verwenden könnten.
Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.

Hier können Sie Ihre Cookie-Einstellungen nach Ihren Wünschen anpassen.

Wir benötigen Ihre Einwilligung zur Verwendung der einzelnen Daten, damit Sie unter anderem Informationen zu Ihren Interessen einsehen können.