Wir benötigen Ihre Einwilligung zur Verwendung der einzelnen Daten, damit Sie unter anderem Informationen zu Ihren Interessen einsehen können. Klicken Sie auf "OK", um Ihre Zustimmung zu erteilen.
Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Mixtures
Automatische name übersetzung:
Standard-Leitfaden für Werkstoffe und Bau von Frei Graded Friction Course Pflanzenmischungen
NORM herausgegeben am 1.12.2013
Bezeichnung normen: ASTM D6932/D6932M-08(2013)
Anmerkung: UNGÜLTIG
Ausgabedatum normen: 1.12.2013
SKU: NS-37053
Zahl der Seiten: 4
Gewicht ca.: 12 g (0.03 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM
Keywords:
asphalt cement, asphalt rubber, modified asphalt cement, open-graded friction course, ICS Number Code 93.080.20 (Road construction materials)
Significance and Use | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
4.1 This guide provides information to assist engineers with the design requirements and construction guidelines for paving an Open-Graded Friction Course (OGFC) surface layer. An OGFC is primarily used to improve the skid resistance and wear resistance of a bituminous pavement by providing an escape route for surface water beneath a moving wheel load. The mixture is typically produced with a low amount of fine aggregate particles and high air void content to provide a passageway of interconnected voids for moisture to drain away from the travelway. The film thickness of the asphalt and overall asphalt content is important for better stripping resistance and durability and aging properties. 1.1 This guide covers the
construction of bituminous open-graded friction course plant
mixtures. End-use specifications should be adopted to conform to
job and user requirements. Where applicable, Specification D3666
should be applied as a minimum for agencies testing and inspecting
road and paving materials.
1.2 Bituminous open-graded friction courses are placed as the final wearing course for highways and airfields. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Historisch
15.8.2011
Historisch
1.12.2007
Historisch
1.12.2009
Historisch
15.9.2007
Historisch
1.11.2009
Historisch
1.1.2012
Wollen Sie sich sicher sein, dass Sie nur die gültigen technischen Normen verwenden?
Wir bieten Ihnen eine Lösung, die Ihnen eine Monatsübersicht über die Aktualität der von Ihnen angewandten Normen sicher stellt.
Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.
Letzte Aktualisierung: 2024-04-28 (Zahl der Positionen: 2 896 137)
© Copyright 2024 NORMSERVIS s.r.o.