Standard Guide for Determination of Pore Volume of Powdered Catalysts and Catalyst Carriers by Water AdsorptionName übersetzen
NORM herausgegeben am 1.6.2021
Bezeichnung normen: ASTM D8393-21
Ausgabedatum normen: 1.6.2021
Zahl der Seiten: 4
Gewicht ca.: 12 g (0.03 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM
catalytic material, FCC, fluid catalytic cracking catalyst, pore volume, water adsorption,
|Significance and Use|
5.1This guide is intended to determine meso- and macropore volume which affects heavy oil cracking performance of a catalyst. The information is useful for materials specification, manufacturing control, and research and development in the evaluation of catalytic materials.
5.2It has been reported in literature the existence of a correlation between the pore volume obtained from this guide and that from Test Method .
1.1This guide measures pore volume of powdered catalysts and catalyst carriers by titration with water. The water does not react with material. The range of pore volume is 0.25 mL/g to 0.46 mL/g.
1.2This guide is suitable for fine catalysts such as fluid catalytic cracking (FCC) catalysts (fresh or equilibrium), catalyst additives and spray dried catalyst carriers or finished catalysts, or a combination thereof, and is typically applicable to powders with the majority of particles (above 90%) in the distribution range between 20 and 150m equivalent spherical diameter (determined by Test Method ) and with an average particle size between 60 and 100m.
Note 1:This technique is capable of measuring particles below and above this range (for example, from 1 to 300m) but no precision data is available.
1.3UnitsThe values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Wollen Sie sich sicher sein, dass Sie nur die gültigen technischen Normen verwenden?
Wir bieten Ihnen eine Lösung, die Ihnen eine Monatsübersicht über die Aktualität der von Ihnen angewandten Normen sicher stellt.
Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.
Letzte Aktualisierung: 2021-09-21 (Zahl der Positionen: 2 526 736)
© Copyright 2021 NORMSERVIS s.r.o.