Wir benötigen Ihre Einwilligung zur Verwendung der einzelnen Daten, damit Sie unter anderem Informationen zu Ihren Interessen einsehen können. Klicken Sie auf "OK", um Ihre Zustimmung zu erteilen.
Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs (Includes all amendments And changes 4/21/2021).
Automatische name übersetzung:
Standard Praxis für die Installation von Fused Silica Öffnen Tubular Kapillarsäulen in Gaschromatographen
NORM herausgegeben am 1.1.2013
Bezeichnung normen: ASTM E1510-95(2013)e1
Anmerkung: UNGÜLTIG
Ausgabedatum normen: 1.1.2013
SKU: NS-42011
Zahl der Seiten: 13
Gewicht ca.: 39 g (0.09 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM
Keywords:
capillary columns, capillary gas chromatography, gas chromatographs, installing capillary columns, ICS Number Code 71.040.50 (Physicochemical methods of analysis)
Significance and Use | |||
5.1 This practice is intended to be used by all analysts using fused silica capillary chromatography. It contains the recommended steps for installation, preparation, proper installation, and continued column maintenance. |
|||
1. Scope | |||
1.1 This practice covers the installation and maintenance of fused silica capillary columns in gas chromatographs that are already retrofitted for their use. This practice excludes information on: 1.1.1 Injection techniques. 1.1.2 Column selection. 1.1.3 Data acquisition. 1.1.4 System troubleshooting and maintenance. 1.2 For additional information on gas chromatography, please refer to Practice E260. For specific precautions, see 7.2.2.2(1), 7.2.2.2(2), 7.2.7, and 7.2.7.2. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Carrier gas |
0.25-mm ID, |
0.32-mm ID, |
0.53-mm ID, |
helium |
35 |
80 |
125 |
Carrier gas: Hydrogen
Carrier gas: Helium
Linear velocity: 40 cm/s
Linear velocity: 20 cm/s
1. Tetrachloro-m-
8. Heptachlor epoxide
15. Endosulfan II
xylene
9. γ-chlordane
16. DDD
2. α-BHC
10. Endosulfan I
17. Endrin aldehyde
3. β-BHC
11. α-chlordane
18. Endosulfan sulfate
4. γ-BHC
12. Dieldrin
19. DDT
5. δ-BHC
13. DDE
20. Endrin ketone
6. Heptachlor
14. Endrin
21. Methyoxychlor
7. Aldrin
Oven temperature: 210°C isothermal
Injector and detector temperature: 250°C/300°C
ECD sensitivity: 512 × 10 −11
Split vent: 100 cm 3 /min
1. 2,4,5,6-tetrachloro-
8. Heptachlor
16. p,p-DDD
m-xylene (IS)
epoxide
17. Endrin aldehyde
2. α-BHC
9. γ-chlordane
18. Endosulfan sul-
3. β-BHC
10. Endosulfan I
fate
4. γ-BHC
11. α-chlordane
19. p,p-DDT
5. δ-BHC
12. Dieldrin
20. Endrin ketone
6. Heptachlor
13. p,p-DDE
21. Methyoxychlor
7. Aldrin
14. Endrin
22. Decachlorobi-
15. Endosulfan II
phenyl (IS)
Oven temperature: 150 to 275°C at
4°C/min,
hold 15 min
Injector temperature: 250°C
Detector temperature: 300°C
Carrier gas: Helium
Linear velocity: 40 cm/s (Flow rate: 10 cm 3 /min)
ECD sensitivity: 8 × 10 −11 AFS
Standard Practice for Gas Chromatography Terms and Relationships (Includes all amendments and changes 4/28/2021). |
|
HB-3 |
Handbook of Compressed Gases |
Standard Practice for Packed Column Gas Chromatography |
Historisch
1.3.2010
Historisch
1.10.2010
Historisch
15.8.2014
Historisch
15.1.2007
Historisch
1.6.2009
Historisch
1.11.2011
Wollen Sie sich sicher sein, dass Sie nur die gültigen technischen Normen verwenden?
Wir bieten Ihnen eine Lösung, die Ihnen eine Monatsübersicht über die Aktualität der von Ihnen angewandten Normen sicher stellt.
Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.
Letzte Aktualisierung: 2024-04-25 (Zahl der Positionen: 2 896 007)
© Copyright 2024 NORMSERVIS s.r.o.