Vorsicht!

In Ihrem Browser ist die Javascript-Aktivierung nicht erlaubt. Einige Funktionen mögen nicht richtig funktionieren. Für vollständige Funktionalität des Internet-Geschäfts empfehlen wir Javascript zu aktivieren. Siehe hier Instruktion, wie man im Ihren Web-Browser JavaScript aktiviert.

Angezeigte Währung: €

Preisanzeige: ohne MWS

UNGÜLTIG ASTM F2665-09(2014) 15.7.2014 Ansicht

Ergänzende Informationen

ASTM F2665-09(2014)

Standard Specification for Total Ankle Replacement Prosthesis

Automatische name übersetzung:

Standard-Spezifikation für Sprunggelenkprothese Prothese

NORM herausgegeben am 15.7.2014

Sprache
Realisierung	PDF - sofortiges Download - 70.00 € Gedruckt - 70.00 €
Zugänglichkeit	AUF LAGER
Preis	70.00 € ohne MWS
70.00 €

Informationen über die Norm:

Bezeichnung normen: ASTM F2665-09(2014)
Anmerkung: UNGÜLTIG
Ausgabedatum normen: 15.7.2014
SKU: NS-54338
Zahl der Seiten: 7
Gewicht ca.: 21 g (0.05 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM

Drucken

Einem Bekannten abschicken

Anfrage

Kategorie - ähnliche Normen:

Aids and adaptation for moving

Die Annotation des Normtextes ASTM F2665-09(2014) :

Keywords:
ankle, ankle constraint, ankle prosthesis, arthroplasty, ankle wear, contact area, contact pressure, fatigue, particles, surface roughness, total ankle replacement (TAR), UHMWPE, ICS Number Code 11.180.10 (Aids and adaptations for moving)

Ergänzende Informationen

1. Scope

1.1 This specification covers total ankle replacement (TAR) prostheses used to provide functioning articulation by employing talar and tibial components that allow for a minimum of 15° of dorsiflexion and 15 to 25° (1)2 of plantar flexion, as determined by non-clinical testing.

1.2 Included within the scope of this specification are ankle components for primary and revision surgery with modular and non-modular designs, bearing components with fixed or mobile bearing designs, and components for cemented and/or cementless use.

1.3 This specification is intended to provide basic descriptions of material and prosthesis geometry. In addition, those characteristics determined to be important to 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

F1800-19e1	Standard Practice for Cyclic Fatigue Testing of Metal Tibial Tray Components of Total Knee Joint Replacements (Includes all amendments and changes 1/17/2020).
F1814-22	Standard Guide for Evaluating Modular Hip and Knee Joint Components
F799-19	Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Forgings for Surgical Implants (UNS R31537, R31538, R31539)
F981-23	Standard Practice for Assessment of Muscle and Bone Tissue Responses to Long-Term Implantable Materials Used in Medical Devices
F983-86(2018)	Standard Practice for Permanent Marking of Orthopaedic Implant Components
F75-23	Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075)
F748-16	Standard Practice for Selecting Generic Biological Test Methods for Materials and Devices
F1537-20	Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539)
F1472-23	Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400)
F1377-21	Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Medical Devices (UNS R30075, UNS R31537, and UNS R31538)
F1223-20	Standard Test Method for Determination of Total Knee Replacement Constraint
F1160-14(2017)e1	Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings (Includes all amendments and changes 1/19/2018).
F1147-05(2017)e1	Standard Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings (Includes all amendments and changes 6/17/2022).
F1108-21	Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406)
F1044-05(2017)e1	Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings (Includes all amendments and changes 1/11/2018).
F136-13(2021)e1	Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401) (Includes all amendments and changes 8/19/2021).
F90-23	Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605)
F86-21	Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants
F67-13(2017)	Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700)
F138-19	Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673)
F562-22	Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035)
F451-21	Standard Specification for Acrylic Bone Cement
F1580-18	Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants
F746-04(2021)	Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials
F745-07	Standard Specification for 18 Chromium-12.5 Nickel-2.5 Molybdenum Stainless Steel for Cast and Solution-Annealed Surgical Implant Applications (Withdrawn 2012)
F732-17	Standard Test Method for Wear Testing of Polymeric Materials Used in Total Joint Prostheses
F648-21	Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants
F565-21	Standard Practice for Care and Handling of Orthopedic Implants and Instruments
F563-00	Standard Specification for Wrought Cobalt-20Nickel-20Chromium-3.5Molybdenum-3.5Tungsten-5Iron Alloy for Surgical Implant Applications (UNS R30563) (Withdrawn 2005)

Empfehlungen:

Aktualisierung der technischen Normen

Wollen Sie sich sicher sein, dass Sie nur die gültigen technischen Normen verwenden?
Wir bieten Ihnen eine Lösung, die Ihnen eine Monatsübersicht über die Aktualität der von Ihnen angewandten Normen sicher stellt.

Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.

Hier können Sie Ihre Cookie-Einstellungen nach Ihren Wünschen anpassen.

Wir benötigen Ihre Einwilligung zur Verwendung der einzelnen Daten, damit Sie unter anderem Informationen zu Ihren Interessen einsehen können.

ASTM F2665-09(2014)

Automatische name übersetzung:

Informationen über die Norm:

Kategorie - ähnliche Normen:

Die Annotation des Normtextes ASTM F2665-09(2014) :

Ergänzende Informationen

Ähnliche Normen:

Empfehlungen:

Aktualisierung der technischen Normen