Wir benötigen Ihre Einwilligung zur Verwendung der einzelnen Daten, damit Sie unter anderem Informationen zu Ihren Interessen einsehen können. Klicken Sie auf "OK", um Ihre Zustimmung zu erteilen.
Additive manufacturing ´ Test artifacts ´ Geometric capability assessment of additive manufacturing systems
Name übersetzen
NORM herausgegeben am 15.1.2019
Bezeichnung normen: ASTM/ISO 52902-19
Anmerkung: UNGÜLTIG
Ausgabedatum normen: 15.1.2019
SKU: NS-955844
Zahl der Seiten: 24
Gewicht ca.: 72 g (0.16 Pfund)
Land: Amerikanische technische Norm
Kategorie: Technische Normen ASTM
Keywords:
ICS Number Code 25.030 (Additive manufacturing)
Significance and Use |
4.1 Measurements and observations described in this document are used to assess the performance of an AM system with a given system set-up and process parameters, in combination with a specific feedstock material. The primary characterization of the AM system obtained by this document is via geometric accuracy, surface finish and minimum feature sizes of the benchmarking test piece(s). 4.2 The test piece(s) can be built and measured for example when the new machine is installed. The test piece(s) may be used to periodically evaluate the performance or diagnose a fault in one AM system, for example, after system maintenance or as defined by the requirements of a quality system. The test piece(s) described in this test method may be used as a demonstration of capabilities for a contract between a buyer and seller of AM parts or AM systems. Data from the measurements described in this document can be used to gauge the impact of new process parameters or material on the AM system performance. Certain test geometries may be included with every build on a particular AM system to help establish performance traceability. Depending on the needs of the end user, not all test artifacts need to be built, and individual test artifacts can be built separately if required. |
1. Scope |
1.1 This document covers the general description of benchmarking test piece geometries along with quantitative and qualitative measurements to be taken on the benchmarking test piece(s) to assess the performance of additive manufacturing (AM) systems. This performance assessment may serve the two following purposes: – AM system capability evaluation; – AM system calibration. The benchmarking test piece(s) is (are) primarily used to quantitatively assess the geometric performance of an AM system. This document describes a suite of test geometries, each designed to investigate one or more specific performance metrics and several example configurations of these geometries into test piece(s). It prescribes quantities and qualities of the test geometries to be measured but does not dictate specific measurement methods. Various user applications can require various grades of performance. This document discusses examples of feature configurations, as well as measurement uncertainty requirements, to demonstrate low and high grade examination and performance. This document does not discuss a specific procedure or machine settings for manufacturing a test piece, which are covered by ASTM F2971 and other relevant process specific specifications. |
Wollen Sie sich sicher sein, dass Sie nur die gültigen technischen Normen verwenden?
Wir bieten Ihnen eine Lösung, die Ihnen eine Monatsübersicht über die Aktualität der von Ihnen angewandten Normen sicher stellt.
Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.
Letzte Aktualisierung: 2024-05-02 (Zahl der Positionen: 2 896 910)
© Copyright 2024 NORMSERVIS s.r.o.