Cookies
Wir benötigen Ihre Einwilligung zur Verwendung der einzelnen Daten, damit Sie unter anderem Informationen zu Ihren Interessen einsehen können. Klicken Sie auf "OK", um Ihre Zustimmung zu erteilen.
ČSN EN 16272-6 (736342)
Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions
Automatische name übersetzung:
Bahnanwendungen - Oberbau - Lärmschutzwände und verwandte Geräte gegen die Ausbreitung des Schalls durch die Luft - Prüfverfahren zur Bestimmung der akustischen Eigenschaften - Teil 6: Produktspezifische Merkmale - Die Luftschalldämmung unter direkter Schallfeldbedingungen (Standard zur unmittelbaren Verwendung als CSN).
NORM herausgegeben am 1.2.2015
Informationen über die Norm:
Bezeichnung normen: ČSN EN 16272-6
Zeichen: 736342
Katalog-Nummer: 96658
Ausgabedatum normen: 1.2.2015
SKU: NS-147821
Zahl der Seiten: 52
Gewicht ca.: 156 g (0.34 Pfund)
Land: Tschechische technische Norm
Kategorie: Technische Normen ČSN
Kategorie - ähnliche Normen:
Noise emitted by means of transportRoad equipment and installationsConstruction of railways
Die Annotation des Normtextes ČSN EN 16272-6 (736342):
Noise barriers installed along railways need to provide adequate sound insulation so that sound transmitted directly through the device is not significant compared to the sound diffracted over the top. This European Standard specifies a test method for assessing the airborne sound insulation performance of noise barriers and related devices acting on airborne sound propagation designed for railways in non-reverberant conditions (a measure of intrinsic performance). It can be applied in situ, i.e. where the noise barriers are installed. The method can be applied without damaging the surface. The method can be used to qualify products to be installed along railways as well as to verify the compliance of installed noise barriers to design specifications. Regular application of the method can be used to verify the long term performance of noise barriers. The method requires the averaging of results of measurements taken at different points behind the device under test. The method is able to investigate flat and non-flat products. The measurement results of this method for airborne sound insulation are comparable but not identical with the results of the EN 16272-2 method, mainly because the present method uses a directional sound field, while the EN 16272-2 method assumes a diffuse sound field (where all angles of incidence are equally probable). The test method described in this European Standard should not be used to determine the intrinsic characteristics of airborne sound insulation for noise barriers to be installed in reverberant conditions, e.g. inside tunnels or deep trenches or under covers or very close to the rail track. For the purpose of this European standard reverberant conditions are defined based on the geometric envelope, e, across the rail formed by the barriers, trench sides or buildings (the envelope does not include the railway surface) as shown by the dashed lines in Figure 1. Conditions are defined as being reverberant when the percentage of open space in the envelope is less than or equal to 25 %, i.e.: Reverberant conditions occur when w/e <= 0,25, where e = (w + h1 + h2) This criterion is applied also to the open space between the train body and the barrier surface
Normansicht ČSN EN 16272-6 (736342)
Ähnliche Normen:
UNGÜLTIG
1.12.2009
UNGÜLTIG
1.12.2014
UNGÜLTIG
1.7.2013
UNGÜLTIG
1.7.2013
1.9.1998
UNGÜLTIG
1.7.2013
Empfehlungen:
EEviZak – alle Gesetze einschließlich ihrer Evidenz in einer Stelle
Bereitstellung von aktuellen Informationen über legislative Vorschriften in der Sammlung der Gesetze bis zum Jahr 1945.
Aktualisierung 2x pro Monat!
Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.
