Wir benötigen Ihre Einwilligung zur Verwendung der einzelnen Daten, damit Sie unter anderem Informationen zu Ihren Interessen einsehen können. Klicken Sie auf "OK", um Ihre Zustimmung zu erteilen.
Tests for electric cables under fire conditions - Circuit integrity - Part 1: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm
Automatische name übersetzung:
Tests für elektrische Leitungen im Brandfall - Funktionserhalt - Teil 1: Prüfverfahren für Feuer mit Schock bei einer Temperatur von mindestens 830 ° C für Kabel mit einer Nennspannung bis einschließlich 0,6 / 1,0 kV und mit einer Gesamt Durchmesser von mehr als 20 mm <
NORM herausgegeben am 19.5.2009
Zugänglichkeit | Ausverkauft |
Preis | AUF ANFRAGE ohne MWS |
AUF ANFRAGE |
Bezeichnung normen: IEC 60331-1-ed.1.0
Ausgabedatum normen: 19.5.2009
SKU: NS-409567
Zahl der Seiten: 48
Gewicht ca.: 144 g (0.32 Pfund)
Land: Internationale technische Norm
CablesElectrical engineering in generalIgnitability and burning behaviour of materials and products
IEC 60331-1:2009 specifies the test apparatus and procedure and gives the performance requirements, including recommended flame application times, for low voltage power cables of rated voltage up to and including 0,6/1,0 kV and control cables with a rated voltage which are required to maintain circuit integrity when subject to fire and mechanical shock under specified conditions. It is intended for use when testing cables of greater than 20 mm overall diameter.NOTE 1 Cables of smaller diameter should be tested using the apparatus, procedure and requirements of IEC 60331-2. This standard describes the means of test specimen preparation, the continuity checking arrangements, the electrical testing procedure, the method of burning the cables and the method of shock production, and gives requirements for evaluating test results.NOTE 2 Although the scope is restricted to cables with rated voltage up to and including 0,6/1,0 kV, the procedure may be used, with the agreement of the manufacturer and the purchaser, for cables with rated voltage up to and including 3,3 kV, provided that suitable fuses are used.Annex A provides the method of verification of the burner and control system used for the test. Requirements are stated for an identification that may optionally be marked on the cable to signify compliance with this standard. This first edition of IEC 60331-1 cancels and replaces IEC 60331-12 (2002) and IEC 60331-31 (2002) to form one single standard.It has the status of a horizontal standard in accordance with
Wollen Sie sich sicher sein, dass Sie nur die gültigen technischen Normen verwenden?
Wir bieten Ihnen eine Lösung, die Ihnen eine Monatsübersicht über die Aktualität der von Ihnen angewandten Normen sicher stellt.
Brauchen Sie mehr Informationen? Sehen Sie sich diese Seite an.
Letzte Aktualisierung: 2024-05-02 (Zahl der Positionen: 2 896 910)
© Copyright 2024 NORMSERVIS s.r.o.